Setup Guides
GTA 6 HDR Too Dark? HDR Settings for PS5 and Xbox Series X
Whether to turn HDR on or off for GTA VI, the PS5 Adjust HDR and Xbox HDR Game Calibration screens step by step, HGiG and tone mapping on LG, Samsung, Sony, TCL, and Hisense, fixes for dark scenes and gray blacks, why HDR looks washed out on a cheap TV, and what to expect on a 1080p set.

We may earn a commission when you buy through links on this site, at no extra cost to you. It never affects what we recommend. Learn more.
If GTA VI looks too dark, too gray, or strangely flat on your TV, the fix is almost never inside the game. Grand Theft Auto VI supports HDR on PS5, PS5 Pro, and Xbox Series X|S, but as far as Rockstar and Digital Foundry have described its menus, it has no HDR sliders of its own. That leaves three places where HDR can go wrong: the console's HDR calibration, the TV's tone-mapping and black-level settings, and the room. This guide walks through all three, in the order to fix them, and ends with what to expect if your TV is 1080p or has no HDR at all.
Should HDR be on or off for GTA 6?
On, as long as the console has been calibrated for your TV. GTA VI was built for HDR, and the bright Florida sun, the neon at night, and the headlights on wet asphalt are where an HDR TV shows what it can do. Turning HDR off hands you a flatter SDR version of the same scenes.
The reason so many people ask is that HDR done badly looks worse than SDR done well. An HDR game with the console's black level set too low loses every shadow detail; one with the TV's tone mapping fighting the console's looks washed out; and on a dim TV, HDR can look duller than the pumped-up SDR mode you are used to. Each of those has a fix below. There is one honest exception: on an edge-lit LCD with no local dimming and well under 500 nits of brightness, SDR may genuinely look better, and we explain when to switch it off in the washed-out section.
Here is the order to work in.
| Step | Where | What to do |
|---|---|---|
| 1 | TV | Put the TV in game mode and pick HGiG, or turn dynamic tone mapping off |
| 2 | TV | Set HDR brightness to maximum, turn off eco mode and the light sensor |
| 3 | Console | Run Adjust HDR (PS5) or Calibrate HDR for games (Xbox) in the room light you play in |
| 4 | TV | Turn off dynamic contrast and "black detail" style settings |
| 5 | Room | Dim the lights behind you; add bias light behind the TV |
Steps 1 and 2 come before the console calibration because the calibration measures the TV as it is set at that moment. Change the TV's tone mapping or brightness afterwards and the calibration no longer matches.
Step 1: set the TV to HGiG, or turn tone mapping off
A TV receiving an HDR game has two choices. It can show the picture the console sends, or it can re-map the brightness to what it thinks looks good, which is called dynamic tone mapping. When the console has already been calibrated for the TV, that second pass is a correction on top of a correction, and it is the most common reason HDR games look either washed out or crushed.
HGiG is the setting that tells the TV to show exactly what the console sends. The name comes from the HDR Gaming Interest Group, a set of guidelines that Sony, Microsoft, and TV makers agreed on, and both consoles' HDR calibration screens are designed around it. Where to find it, with the caveat that names move between model years:
- LG: in the Game Optimizer menu or under Picture > Advanced Settings > Brightness > Dynamic Tone Mapping, choose HGiG. Every LG OLED since 2019, including the LG C6, has it.
- Samsung: in Game Mode Settings, set HDR Tone Mapping to Static. On recent Samsung sets Static is the HGiG behavior; older models label the option HGiG directly.
- Sony: Sony has no HGiG option. Set HDR Tone Mapping to Off in the picture menu if the TV offers it, or to Gradation Preferred, which keeps highlight detail. A PS5 paired with a recent BRAVIA can also set the console's HDR levels automatically through Sony's Auto HDR Tone Mapping, in which case you can skip the manual calibration.
- TCL and Hisense: look in the game-mode or HDR picture menu for HGiG, Static, or a Dynamic Tone Mapping option. Pick HGiG or Static where it exists; otherwise turn dynamic tone mapping off. On the TCL QM7L, TCL QM8L, and Hisense U7SG, the option sits in the game settings that appear when the console is in game mode.
If none of those options exists on your TV, which is the case on many sets from before 2019, set any dynamic tone mapping to Off and move on. The console calibration still helps.
Step 2: maximum HDR brightness, eco mode off
Xbox's own recommended TV settings for HDR are worth following on either console, because they are the assumptions the HDR calibration app makes:
- Set the HDR brightness control to maximum. It is called Backlight on most LCDs, OLED Light or OLED Pixel Brightness on LG, and Peak Luminance or Brightness on others. In HDR this control sets how bright the TV can go, not how bright the whole picture is, so maximum is correct even in a dark room.
- Turn off the TV's energy saving or eco mode, which quietly caps brightness, and turn off the light sensor or ambient light detection, which changes the picture as the room changes. The console calibration cannot track a TV that is adjusting itself.
- Leave local dimming on if the TV has it. On a Mini-LED like the QM7L or U7SG it is what makes black look black; an OLED has no such setting.
- Set color temperature to Warm 1, Warm 2, or W10 rather than Standard or Cool. Xbox recommends warm because it is closer to the colors the game was made in, and it makes night scenes look less blue-gray.
- Set sharpness to zero or its minimum, and turn off edge enhancement or "reality creation" style processing, which halo the game's bright edges.
Do this with the TV already displaying HDR. Most TVs keep separate SDR and HDR picture settings, so a change made while the console menu is in SDR may not touch the HDR picture at all. Starting the console's HDR calibration puts the TV in HDR mode, so you can make these changes from inside it.
Step 3: run the console's HDR calibration
Run it on the TV you play on, in game mode, in the room lighting you will actually play in. A calibration done at noon with the curtains open will be too bright at night, and vice versa. Both consoles store the result and hand it to GTA VI, which uses it in place of HDR sliders of its own.
PS5 and PS5 Pro: Adjust HDR
Sony's support page gives the path: Settings > Screen and Video > Video Output > Adjust HDR. First check Video Output > HDR, where On When Supported sends HDR only to games and apps that have it, which is the setting to use; Always On also converts SDR apps to HDR, which GTA VI does not need. Then:
- Screen 1, brightest. The console shows a symbol on a bright field and asks you to raise the brightness until the symbol is barely visible, then step back one notch. This tells the console how bright your TV can go.
- Screen 2, brightest again. The same test on a larger bright area. On a Mini-LED the answer is usually the same as screen 1; on an OLED, which dims large bright areas, it is often a step or two lower.
- Screen 3, darkest. The console shows a symbol on a black field and asks you to lower the brightness until the symbol is barely visible, then step back one notch. This is the screen that decides whether night in Vice City has shadow detail or a black hole, and it is the one to redo if the game looks too dark.
On PS5 Pro the steps are identical. If you later change TVs, change the tone-mapping setting, or move the TV to a different room, run it again.
Xbox Series X and Series S: Calibrate HDR for games
Microsoft's path: press the Xbox button, then Profile & system > Settings > General > TV & display options > Calibrate HDR for games. Before you start, check TV & display options > Video modes and make sure Allow HDR10 is on. The HDR Game Calibration app walks through a similar set of screens:
- Minimum brightness. Adjust the slider until the pattern on the dark screen is just barely visible. Set it too dark and the game crushes its shadows.
- Maximum brightness, small area. Adjust until the pattern in a small bright patch just disappears into the background.
- Maximum brightness, full screen. The same test on a large bright area, which is where OLEDs land lower than Mini-LEDs.
- Preview. The app shows sample HDR scenes with your values so you can check the sky still has clouds in it and the shadows still have detail.
Microsoft notes that the app also lets you watch the effect of changing TV settings while the TV is in HDR mode, so it is a good screen to leave open while you do step 2 above. Auto HDR, in the same Video modes menu, only affects games without native HDR, so it does nothing for GTA VI either way.
Step 4: black level and dark-scene fixes
The query that brings most people here is that GTA 6 in HDR looks too dark, especially at night, in interiors, and in the swamp and forest scenery outside the city. Work down this list.
Redo the dark screen of the console calibration. If the darkest-level screen was set so that the symbol vanished completely, the console thinks your TV's black is darker than it is and sends shadows the TV cannot show. Go back to Adjust HDR or Calibrate HDR for games and raise that one screen a notch or two, until the symbol is clearly, not barely, visible. This is the single most effective fix.
Check the HDMI black level. The console and the TV have to agree on the signal's black point. On PS5, Settings > Screen and Video > Video Output > RGB Range should be Automatic; on Xbox, TV & display options > Video fidelity & overscan > Color space should be Standard (recommended). On the TV, the matching setting is called HDMI Black Level (Samsung), Black Level (LG and Sony), or HDMI Range; set it to Auto or Low. A mismatch either lifts black to gray or swallows everything below a certain level, and it looks exactly like a bad HDR calibration.
Turn off dynamic contrast, black detail, and shadow enhancers. Xbox's guidance is to disable settings called dynamic contrast, contrast enhancer, or black detail, because they change the brightness of the SDR range inside the HDR image and undo the calibration. The one case to leave them on is a TV that is not very bright, or a bright room, where the picture otherwise looks dull.
Leave the brightness control at its default. On most TVs the control labeled Brightness, as opposed to Backlight or OLED Light, sets the black level, and raising it turns black into gray without recovering any detail. Keep it at 50 or whatever the TV calls the midpoint, and use the console's dark screen instead.
On an OLED, check the dark-room settings. OLED Pixel Brightness or OLED Light should be at maximum in the HDR game mode, as in step 2. If the TV has a Peak Brightness option, set it to High. Some OLEDs also offer a Black Stabilizer or Dark Detail slider in the game menu; a small positive value lifts the darkest shadows without touching the rest of the picture, and it is the right tool if the console calibration alone is not enough. Burn-in protection, which dims static elements such as GTA's minimap, is separate; leave it on.
Fix the room. An HDR picture calibrated in a dark room looks dark in a lit one, because your eyes adapt to the brightest thing in view, and in a lit room that is the room. Lights behind you reflect off the screen and lift the black level; lights behind the TV do the opposite. A soft, neutral light on the wall behind the screen makes the same black look blacker, lets you see more shadow detail at the same setting, and is far easier on the eyes for a long session than a bright screen in a dark room. That is what bias lighting is for.
- Search on Amazon
Govee TV backlight kit
An LED strip for the back of the TV with a white mode. Set it to neutral white at low brightness for dark HDR scenes; kits are sized by TV diagonal, so match yours.
- Search on Amazon
Philips Hue Play HDMI Sync Box
Sits between the console and the TV and drives Hue lights to match the game. Needs Hue lights and a bridge; set the lights to a steady white when you want bias light rather than a light show.
Set a bias light to a neutral white around 6500 K at a modest brightness, not to a color, if you want it to help shadow detail rather than tint the picture. The HDMI sync boxes that change color with the game are a different thing, fun but not calibration; they still raise the light level behind the TV, which is the part that helps.
Why HDR looks washed out on a cheap TV
HDR asks the TV to show a range from true black to a 1,500-nit highlight, which is roughly what Digital Foundry measured in GTA VI. A TV that can reach 400 nits with no local dimming has to compress that range into its own, and the two usual outcomes are a picture that looks gray and flat, or one that looks dim next to the SDR mode you are used to. The reasons:
- No local dimming. An edge-lit or direct-lit LCD without local dimming lights the whole screen to show one streetlight, so black turns gray. HDR makes it worse than SDR does because HDR's highlights ask for more backlight.
- Not enough brightness. HDR signals hand the TV an absolute brightness for each pixel. When the TV cannot reach it, the midtones get compressed down to make room for highlights, which is what reads as washed out.
- The SDR mode is cheating. Standard and Vivid presets push contrast and saturation well past accurate. HDR, calibrated properly, is more faithful and therefore looks less punchy by comparison.
What to do on such a TV: follow steps 1 through 4 anyway, leave dynamic contrast on if the picture looks dull (Xbox's advice for dim TVs), and compare. If SDR still looks better to you, turn HDR off at the console. On PS5, set Video Output > HDR to Off; on Xbox, turn off Allow HDR10 under Video modes. Rockstar built the game's pipeline for SDR too, and a well set-up SDR picture on a 400-nit TV beats a struggling HDR one. The mid-term fix is a brighter TV with local dimming: the TCL QM7L and Hisense U7SG in our GTA 6 TV picks are both well over 2,000 nits, and our Mini-LED vs. OLED guide explains how brightness and black level trade off between the two.
GTA 6 on a 1080p or non-HDR TV
The game works. PS5, PS5 Pro, and Xbox Series X check what the TV accepts and send a 1080p picture to a 1080p TV; Series S outputs 1080p everywhere. Most 1080p TVs have no HDR, so the game runs in SDR, which Rockstar says its pipeline was built for alongside HDR. Nothing in the console's HDR menu applies, and the Adjust HDR or Calibrate HDR screens will not run on a TV that does not report HDR.
What still matters on an older TV:
- Game mode, so the TV adds as little lag as possible to a 30 fps game that already has about 180 ms of input latency in Digital Foundry's measurements on Series X.
- Motion smoothing off, for the same reason it is off on a new TV.
- A Standard or Movie preset at a warm color temperature rather than Vivid, with sharpness at its neutral point.
- HDMI black level set to match the console's RGB range, exactly as in step 4, since the mismatch happens in SDR too.
A 1080p HDR TV is rare but exists, and a Series S on a 4K HDR TV outputs 1080p with HDR. In both cases the HDR steps above apply at the lower resolution. If you are deciding whether this is the moment to replace the TV, the requirements section of our GTA 6 TV guide lists what the game actually asks for, and the TV size calculator tells you what size fits your couch.
Frequently asked questions
Should I turn HDR on or off for GTA 6? On, with the console calibrated on your TV and HGiG or static tone mapping selected. The game has no HDR sliders of its own that Rockstar or Digital Foundry has described, so the console calibration is what it uses. Turn HDR off only on a dim TV with no local dimming, where SDR may look better.
Why does GTA 6 look so dark in HDR? Usually because the dark-level screen of the console's HDR calibration was set too low, which tells the game your TV can show blacks it cannot. Redo that screen so the symbol is clearly visible. After that, check the HDMI black level match between console and TV, turn off dynamic contrast and black detail processing, and add light behind the TV rather than behind you.
What is HGiG and should I use it? HGiG is a TV setting that stops the TV from re-mapping an HDR game's brightness, so the console's calibration is the only one in the chain. Use it where the TV has it: LG labels it HGiG, Samsung's equivalent is Static tone mapping, and TCL and Hisense offer one or the other on recent models. Sony TVs do not have it; turn HDR tone mapping off or use Gradation Preferred instead.
Do I need to recalibrate HDR for GTA 6 specifically? No. The console calibration is per TV, not per game, and GTA VI reads the same values as every other HDR game. If other HDR games look right and GTA VI looks dark, the room is the likely difference: the game spends a lot of time at night and indoors, which shows up a calibration done in a bright room.
Does HDR add input lag? No. HDR changes the brightness range of the signal, not the TV's processing path, and game mode handles HDR and SDR at the same speed on every current TV. The lag to avoid comes from motion smoothing and from leaving game mode off, which our GTA 6 TV settings guide covers.
Does GTA 6 support Dolby Vision? Not announced. Rockstar's statements and Digital Foundry's reviews do not mention it, and the Xbox store listing shows no Dolby Vision badge. PS5 does not output Dolby Vision for games at all, so on PlayStation the game is HDR10 regardless. If an Xbox shows a Dolby Vision badge when the game starts, the console is handling the conversion and you can leave Dolby Vision for gaming on; the calibration above still applies.
Which TV setting fixes blacks that look gray? On a Mini-LED, make sure local dimming is on and the HDMI black level matches the console. On any TV, put the Brightness control back at its midpoint, turn off eco mode, and reduce the light coming from behind you. If black is still gray on an edge-lit LCD, that is the panel, and only a TV with local dimming or an OLED changes it.
Is HDR worth it on an Xbox Series S? Yes if the TV is a good HDR set. Series S renders at 720p and upscales to 1080p, but HDR brightness and color do not depend on resolution, so the sun and the neon look the same as on a Series X, just softer. Calibrate it the same way.
Get new guides in your inbox
One email when we publish something worth reading. No spam.

