Setup Guides
Best TV Settings for GTA 6: Game Mode, HDR, and What to Turn Off
The TV and console settings for GTA VI on PS5 and Xbox Series X|S: game mode and ALLM, motion smoothing off, HDR calibration, HGiG, OLED protection, 3D audio, and why 120 Hz and VRR do not matter at 30 fps.

We may earn a commission when you buy through links on this site, at no extra cost to you. It never affects what we recommend. Learn more.
Grand Theft Auto VI arrives on November 19, 2026, for PS5 and Xbox Series X|S, and Rockstar has confirmed that it targets 30 frames per second on both, PS5 Pro included; Digital Foundry's tests of the shipped game found no 40 or 60 fps option on any console. That shapes every setting below. At 30 fps, the things that make a game look and feel good are low input lag, no added motion processing, and HDR that is set up for your TV, not the 120 Hz and VRR features that sell gaming TVs. Here is what to change, in the order to change it.
The settings at a glance
| Setting | Set it to | Why |
|---|---|---|
| Game mode | On | Or ALLM, so the console switches it for you |
| Motion smoothing | Off | Adds lag and smears fast driving |
| Noise reduction | Off | Softens the image for nothing |
| HDR | Calibrate | Run the console's HDR setup on this TV |
| HDMI cable | Ultra High Speed | Certified, console to TV or receiver |
| OLED protection | Leave on | The map and HUD sit still for hours |
| PS5 3D audio | On | With headphones; Tempest 3D Audio is confirmed |
1. Turn on game mode
Game mode is the single biggest change. Outside it, a TV runs the picture through several frames of processing before it reaches the screen, which adds 50 to 100 milliseconds of delay on many sets. Game mode skips most of that and brings a modern TV down to around 10 ms. That matters more than usual here: Digital Foundry measured about 180 ms from controller to screen on Xbox Series X with a fast TV, which is normal for a 30 fps Rockstar game, so a TV outside game mode would push it well past 200 ms.
Most TVs made since about 2019 support ALLM (auto low latency mode), which lets the console tell the TV to enter game mode when a game starts and leave it when you open a streaming app. On PS5 it is on by default; check Settings > Screen and Video > Video Output > ALLM. On Xbox it is under Settings > General > TV & display options > Video modes > Allow auto low-latency mode. If your TV lacks ALLM, pick the Game picture mode yourself and leave it there.
Within game mode, the picture presets that most TVs offer (Game Standard, Game Vivid, and so on) are fine to tweak; the latency is the same. Lower sharpness to its neutral setting, since a 4K signal needs no artificial edge enhancement.
2. Turn off motion smoothing
Motion smoothing, also sold as TruMotion, Motionflow, Auto Motion Plus, Action Smoothing, or Ultra Smooth Motion, invents frames between the ones the game draws. On a 30 fps game that produces a soapy look during slow camera moves, obvious smearing behind cars and pedestrians during fast driving, and a lot of added lag while the TV works out what the extra frames should be.
Game mode switches it off on almost every TV, but check: some sets keep a mild "de-judder" or "game motion" option active even in game mode. Set it to Off. If a 30 fps game then looks a little choppy when the camera pans, that is the game's real frame rate, and no TV setting changes it. The one control that does is inside the game: Digital Foundry reports that GTA VI's motion blur slider defaults to 3 out of 10, and that raising it hides judder on camera pans while lowering it keeps the image sharper. Try 3 to 5 if pans bother you, and 0 to 2 if you prefer clarity.
3. Switch off noise reduction and sharpening
While you are in the picture menu, turn off every "noise reduction" in the TV's picture settings, including MPEG or digital noise reduction and any "smooth gradation" option. These were designed for compressed broadcast video. A console sends a clean signal, so noise reduction only softens detail in textures and distant scenery. Set sharpness to its neutral value, which is 0 on some brands and the middle of the range on others, and turn off any "reality creation", "super resolution", or "edge enhancement" feature.
4. Run the console's HDR calibration
GTA VI supports HDR. Rockstar says its core lighting, frame processing, and presentation pipeline was built with both HDR and SDR support, and Digital Foundry's review reports specular highlights beyond 1,500 nits, so the bright Florida sun and the neon at night are where an HDR TV earns its keep. Run the console's HDR calibration before you start the game, with the TV in game mode and in the room lighting you will actually play in. Both consoles store the result and pass it to games that support HDR, and this one does.
- PS5: Settings > Screen and Video > Video Output > Adjust HDR. Three screens ask you to raise brightness until a symbol is barely visible, then the same for the darkest level. On PS5 Pro the steps are the same.
- Xbox Series X|S: Settings > General > TV & display options > Calibrate HDR for games. Follow the on-screen patterns.
If your TV has an HGiG option in its HDR or tone-mapping menu, which LG and Samsung sets do, select it first. HGiG tells the TV to show exactly what the console sends instead of re-mapping it, so the console calibration you just did is the only one in the chain. On other brands, set dynamic tone mapping to Off or to its "game" setting.
As far as Rockstar and Digital Foundry have described the game's menus, GTA VI has no HDR sliders of its own: Digital Foundry calls motion blur one of the few settings in the game, and Rockstar's engineers did not mention any in-game HDR controls. That makes the console calibration the one that counts. If a later patch adds peak-brightness or paper-white sliders, we will add recommended values here. If the game still looks too dark or washed out after the calibration, our GTA 6 HDR settings guide covers HGiG and tone mapping by TV brand, the black-level fixes, and when to turn HDR off.
5. Use a certified Ultra High Speed HDMI cable
The cable in the PS5 and Xbox Series X box is a certified Ultra High Speed HDMI cable, and it is the one to use between the console and the TV or receiver. Strictly, a 30 fps 4K HDR game needs only a High Speed cable, and if you have a long run that already works, there is no reason to replace it. But a certified cable is cheap insurance against the flashing or black screens that marginal cables cause when the console negotiates HDR, it is required for the 4K120 output other games use, and it is required if you run an Xbox at its 120 Hz output for GTA VI (see the 120 Hz question below). Our HDMI cable guide explains the certification tiers.
If the console connects through an AV receiver or soundbar, that device needs to pass 4K HDR through. Receivers from about 2016 on do; older ones may force the console to drop to 1080p or disable HDR.
6. On an OLED, leave the protections switched on
GTA's minimap, cash and health readouts, and mission text sit in the same place on screen for hours, which is the pattern that eventually leaves ghost images on an OLED panel. Every current OLED defends against it: pixel shifting nudges the whole image a few pixels every few minutes, logo and static-content dimming lowers the brightness of elements that have not moved, and a pixel refresher runs when the TV is on standby. These are on by default, so leave those protections switched on, and let the TV go into standby rather than cutting its power at the wall so the refresher can run. Lower the OLED light setting a little for very long sessions, and do not pause the game and walk away for an hour with the HUD on screen.
A Mini-LED or any other LCD has no burn-in risk, which is one reason our GTA 6 TV picks lead with the TCL QM7L and Hisense U7SG.
7. On PS5, turn on 3D audio
Rockstar says the PS5 version's spatial audio takes full advantage of Tempest 3D Audio. With headphones, turn on 3D audio under Settings > Sound > Audio Output > Enable 3D Audio for Headphones, and run the short height test so the engine knows how your ears hear elevation. 3D audio for TV speakers is also available and worth a try, though it depends on the TV's speakers. If the sound goes to a receiver or soundbar, leave 3D audio off and let the receiver decode the multichannel output instead. On Xbox, choose Windows Sonic for Headphones or Dolby Atmos for Headphones under Settings > General > Volume & audio output, and for a surround system set the HDMI audio to Bitstream out. Rockstar has not announced Dolby Atmos for GTA VI and the Xbox store listing shows no Atmos badge, so treat the Xbox's Atmos options as the console's own processing of the game's surround mix, which Digital Foundry describes as full surround propagation, rather than a native Atmos track. For which headset to buy for either console, see our best headset for GTA 6.
Frequently asked questions
Do I need a 120 Hz TV for GTA 6? No. Rockstar has confirmed a 30 fps target on PS5, PS5 Pro, and Xbox Series X|S, and Digital Foundry's tests of the shipped game found no 60 fps or 120 Hz mode on any console. A 120 Hz panel draws each of those 30 frames four times; a 60 Hz panel draws each twice. Either way the picture is identical. Digital Foundry does report one small refinement: Xbox Series X|S can present the game inside the console's 120 Hz VRR output, which felt slightly smoother in its testing, with input lag unchanged. PS5 has no 120 Hz option for the game. Buy 120 Hz for the other games you play, not for this one.
Should I turn on VRR? Leave it on if your TV and console support it, since it does no harm, but do not expect much from it here. VRR smooths out games whose frame rate wanders, and PS5's VRR works between 48 and 120 Hz with no low-frame-rate compensation, so a game at 30 fps never enters that range; Digital Foundry confirms it does nothing for GTA VI on PS5. On Xbox, with the console set to 120 Hz and VRR on, Digital Foundry found the game runs inside a 120 Hz VRR signal and feels slightly smoother, which is the one case where the setting earns its place.
Does the PS5 Pro run GTA 6 at 60 fps? No. Rockstar says the PS5 Pro has the same 30 fps target as the other consoles, and its technology production director told Kotaku that the Pro's processor "is not powerful enough to run the game's complex simulation at higher frame rates". What the Pro adds is a clearer image through PSSR upscaling and ray-traced shadows that the base PS5 and Xbox do not get, and Digital Foundry found it holds 30 fps with perfect frame pacing where the base PS5 and Series X dip to the high 20s. The settings on this page apply to it unchanged.
How should I calibrate HDR for GTA 6? Use the console's calibration. GTA VI supports HDR, with highlights beyond 1,500 nits in Digital Foundry's measurements, but neither Rockstar nor Digital Foundry describes any HDR sliders in the game's own menus, so the console calibration is what the game uses. Put the TV in game mode, pick HGiG if the TV offers it, then run Adjust HDR on PS5 or Calibrate HDR for games on Xbox. If a patch adds in-game sliders, start with their defaults, since the console calibration already describes your TV to the game.
Does GTA 6 support Dolby Vision? Not announced. As of November 18, Rockstar's statements do not mention it, Digital Foundry's reviews do not mention it, and the Xbox store listing's capability tags show no Dolby Vision or HDR10 badge. Photos of the Xbox retail box with Dolby Vision and Dolby Atmos logos are circulating online, but we have not verified them. PS5 does not output Dolby Vision for games at all, so on PlayStation the game uses HDR10 whatever happens. Xbox Series X|S can output Dolby Vision for gaming on TVs that support it, and some games are converted to it by the console. If GTA VI is one of them you will see the Dolby Vision badge appear on your TV when the game starts, and you can leave the Xbox's Dolby Vision for gaming setting on. On a Samsung TV, which has no Dolby Vision, nothing changes.
Will GTA 6 burn in my OLED? Not if you leave the panel protections on. The HUD is the risk, and pixel shift plus static-content dimming are designed for exactly that. Burn-in reports from players who kept those defaults on through long Red Dead Redemption 2 and GTA Online sessions are rare. Keep the OLED light below maximum for marathon sessions, and avoid leaving the paused game on screen for long stretches.
Should I turn motion smoothing on to make 30 fps look smoother? No. The invented frames add lag, so steering and aiming feel late, and they produce halos around moving objects. Some TVs offer a mild game-mode motion setting that adds a frame or so of delay; if the judder on camera pans bothers you, that is the only version worth trying. Otherwise accept the 30 fps look, or raise the game's own motion blur slider a notch or two from its default of 3, which Digital Foundry says smooths pans at the cost of a little clarity. A Mini-LED TV shows 30 fps with a little less visible judder than an OLED because its pixels change more slowly.
What size TV is right for GTA 6? Open-world games reward a big screen. At 8 feet, a 65-inch TV suits mixed use; at 9 feet, 75 inches; at 10 feet, 82 to 85 inches. Our TV size calculator gives the exact answer for your room, and our GTA 6 TV guide covers which TVs to buy at each size.
Get new guides in your inbox
One email when we publish something worth reading. No spam.

