How high should a 65-inch TV be mounted?

For a typical sofa (eyes about 42 inches off the floor), put the bottom edge of a 65-inch TV at about 26 inches, which places the center at 42 inches, straight in front of your eyes.

How high is the center of a 65-inch TV?

The panel is 31.9 inches tall, so the center sits 15.9 inches above the bottom edge. Aim the center at your seated eye height.

Can I mount a 65-inch TV above a fireplace?

With a 60-inch mantel, the center of a 65-inch TV ends up about 76 inches high, 21° above eye level at 7 ft 3 in. That exceeds the 15° comfort limit; use a pull-down mount or a different wall.

What if I sit farther away?

Elevation angle shrinks with distance, so a higher mount becomes acceptable. At 7 ft 3 in the center can go up to 57 inches (10°) before it gets uncomfortable; at double the distance, roughly twice as high above eye level.

65-inch TV

How high should you mount a 65-inch TV?

Put the bottom edge about 26 inches from the floor so the center of the 32-inch-tall panel lands at seated eye level (42 inches). Adjust for your own eye height with the table below.

Adjust in the tv mounting height calculator

Bottom edge height

26 in

from the floor, for 42 in seated eye height. Center at 42 in, top at 58 in.

Panel height

31.9 in

56.7 in wide

Typical viewing distance

7 ft 3 in

THX 36° for this size

Max comfortable center

57 in

10° above eye line

Absolute max center

65 in

15°, needs tilt

Bottom-edge height for every eye height

Seated eye height	Typical seating	Bottom edge	Center	Top edge
38 in	Low sofa, floor cushions	22 in	38 in	54 in
40 in	Standard sofa, recliner	24 in	40 in	56 in
42 in	Standard sofa, recliner	26 in	42 in	58 in
44 in	Tall sofa, dining chair	28 in	44 in	60 in
46 in	Tall sofa, dining chair	30 in	46 in	62 in
48 in	Counter stool	32 in	48 in	64 in

How we got these numbers

A 65-inch 16:9 TV measures about 56.7 by 31.9 inches. The reference mounting position puts the center of that panel at your seated eye height, which for most sofas is 40 to 44 inches. We use 42 inches as the default and show other eye heights in the table.

From there the bottom edge is simply eye height minus half the panel height: 42 − 15.9 = 26.1 inches. If the TV has to go higher, the number that matters is the elevation angle from your seat. Under 10° is comfortable for long sessions; 15° is the practical limit, and it needs a tilting mount.

The bracket height depends on your specific TV: measure from its bottom edge to the center of the VESA holes and add that to the bottom-edge height above.

Common questions

How high should a 65-inch TV be mounted?: For a typical sofa (eyes about 42 inches off the floor), put the bottom edge of a 65-inch TV at about 26 inches, which places the center at 42 inches, straight in front of your eyes.
How high is the center of a 65-inch TV?: The panel is 31.9 inches tall, so the center sits 15.9 inches above the bottom edge. Aim the center at your seated eye height.
Can I mount a 65-inch TV above a fireplace?: With a 60-inch mantel, the center of a 65-inch TV ends up about 76 inches high, 21° above eye level at 7 ft 3 in. That exceeds the 15° comfort limit; use a pull-down mount or a different wall.
What if I sit farther away?: Elevation angle shrinks with distance, so a higher mount becomes acceptable. At 7 ft 3 in the center can go up to 57 inches (10°) before it gets uncomfortable; at double the distance, roughly twice as high above eye level.

Gear that fits

We may earn a commission when you buy through links on this site, at no extra cost to you. It never affects what we recommend. Learn more.

Short certified HDMI 2.1 run

Zeskit Maya 8K 48Gbps Certified Ultra High Speed HDMI Cable, 6.5 ft

$17

Certified Ultra High Speed (48 Gbps)
6.5 ft / 2 m
4K120, 8K60, eARC, VRR
Hologram certification label

The most-recommended short HDMI 2.1 cable on AVSForum, with the official Ultra High Speed certification label and enough flexibility to route behind a rack. Use it for the AVR-to-TV and console-to-AVR runs.

View on Amazon

In-wall surround runs

Monoprice Speaker Wire, CL2 Rated, 2-Conductor, Color Coded, 14AWG, 99.9% Oxygen-Free Pure Bare Copper, 100 Feet, Black

$62

14 AWG, 2-conductor
99.9% oxygen-free bare copper (not CCA)
CL2 in-wall rated
100 ft spool, color-coded jacket

Real oxygen-free copper at 14 gauge, with a CL2 jacket that satisfies residential in-wall code. Enough for a 5.1 layout in a medium room with runs under 50 ft.

View on Amazon

Budget full-motion mount

Mounting Dream Full Motion TV Wall Mount for 42-90 Inch TV, Max VESA 600x400mm, Up to 132 lbs, MD2298

$110

42 to 90 in TVs, 132 lb rated
VESA up to 600 x 400
18.3 in extension, swivel +/-45 deg
Fits 16, 18, 24 in stud spacing

The best-selling budget full-motion mount, rated for 132 lb and VESA 600 x 400 with dual articulating arms. Extension and swivel range are shorter than the Sanus or Echogear, which is fine for a mount that mostly stays flat.

View on Amazon

10 ft or in-wall certified run

Monoprice 8K Certified Ultra High Speed HDMI 2.1 Cable, CL2 In-Wall Rated, 30AWG, 10 ft, Black

$14

Certified Ultra High Speed (48 Gbps)
10 ft, CL2 in-wall rated
30 AWG copper
Lifetime warranty

A certified 48 Gbps cable with a CL2 jacket, so the same cable works for a longer equipment-rack run or inside a wall. Monoprice has been the default value pick for HDMI for years.

View on Amazon